Manganese Oxide

Thursday, 11 October 2012

Manganese Oxide / Manganese Dioxide Synonyms:

Manganese dioxide (MnO2), Manganese oxide (MnO), Manganese (IV) oxide, CAS # 1313-13-9,  MIL-M-3281A,  Black manganese oxide, manganese oxide coated activated carbon textile fibers, BOG manganese, Braunstein, Bruinsteen, Cement black, Mangaanbioxyde, Mangaandioxyde, Mangandioxid, Manganese biossido di, Manganese bioxyd de, Manganese diossido di, Manganese dioxyde de, Manganese binoxide, Manganese black, Manganese dioxide, Manganese dioxide ore, Manganese peroxide, Manganese superoxide, Pyrolusite brown, 
Manganese Oxide / Manganese Dioxide Formula: 
MnO & Mn02    
Manganese Oxide / Manganese Dioxide Description: 

Cubic green crystals that are insoluble in water but soluble in acids.
Manganese dioxide is the inorganic compound with the formula MnO2. This blackish or brown solid occurs naturally as the mineral pyrolusite, which is the main ore of manganese 
Manganese Oxide / Manganese Dioxide Typical Chemical Properties Available: 

Mn= 55.8% , MnO2 = 84.41% and Fe= 1.6%

MSDS Benzoid Acid

ChemSpider 2D Image | Benzoic acid | C7H6O2Benzoic acid

  • Molecular Formula: C7H6O2
  • Average mass: 122.121002 Da
  • Monoisotopic mass: 122.037003 Da 




NAME IDENTIFICATION

214-089-0
65-85-0 
Acid, Benzoic
Acide benzoique [French]
Acide benzoïque [French]
Acido benzoico [Italian]
Alcohol bencilico [Spanish]
benzene carboxylic acid
Benzenecarboxylic acid
benzeneformic acid
Benzenemethanoic acid

 EXPERIMENTAL DATA

TARTARIC ACID

TARTARIC ACID



Product name   :  Tartaric Acid Anhydrous BP 98 Food Grade
Invoice        :  2011001306
Batch No.      :  KOGE-0243
Test time      :  Dec.20, 2011
Expire date    :  to May, 2013
Test Result    :
Appearance     :  Very dry white crystal

TEST                SPECIFIKATION               RESULT

Content             99.9 % min                  99.7 %
Pb                  0.001 % max                 0.0008 %
Chloride            0.002 % max                 0.001 %
As                  0.002 % max                 0.0015 %
Sulfate             0.01 % max                  0.005 %
Loss Weight dry     1 % max                     0.8 %
Oxidable            passed                      passed
Melting Point       200 – 206 0 C               203

Certificate of Analysis TEEPOL LA 10



CERTIFICATE OF ANALYSIS

TEEPOL LA 10



Teepol LA 10 is a blend of biologically soft Alkyl Benzene
Sulphonates and Nonionic Alkyl Phenol Ethylene Oxide Condensates.



Typical Data
Property
Test Method
Typical Test Figure
-   Appearance
-   Colour (Filter 42, 1 CM Cell)
-   Specific Gravity at 15,5/15,50 C
-   pH of 2% WT Active matter solution in Distilled Water
-   Clear Point, o C
-   Pour Point, o C
-   Kinematic Viscosity at 15 o C, CS
-   Wetting Power (Draves Test)
-   Initial Foam (Ross & Miles Test) at 100 o F, 0,25 g/l
-   Surface Tension at 20 o C, 0,5 g/l
-   Interfacial Tension (Xylene V, Water) 1,0 g/l
-   Flashpoint
Visual

Klett
ASTM-D-1500
ASTM-D-1298

ASTM-E-70


SMS-600
ASTM-D-97
ASTM-D-445

ASTM-D-2281

ASTM-D-1173


-

-

ASTM-D-93
­Clear, Pale
Amber Liquid
100 max
1,0 max
1,08

8,0


2 max
<5
300

10 sec/0,38%

195 mm


29 Dynes/CM

2 Dynes/CM

145 o C min

DDC (Dry Dust Cleaner)

Friday, 5 October 2012


MSDS
Material Safety Data Sheet






Chemical & Company Identification
Product Name                   :  Dry Dust Cleaner (DDC)
Product code                    :  1500 – 02 – 1

Company                          :  mkr-chemical
                                          :  Semarang – Indonesia
                                          :


  +6224 – 8450 666
                                          :  +6224 – 8416 102
Chemical Description       :  Ferrocene mineral oil

Composition & Ingredients

Components                                                                           CAS No.                Range in %

Chemical identity; common name(s)                                     recommended      (optional)
Alkana Linier                                                                            8042 – 47 – 5        99 %
Hazards Identification

Warning statements         :  -  Inflammable
                                             -  Harmful if inhaled or absorbed through skin
                                             -  May cause dizziness and drowsiness
                                             -  May cause eye and skin irritation
                                             -  Aspiration hazard can cause lung injury if ingested and
                                                Swallowed
                                             -  Keep out of reach of children

Emergency Overview
Potential Health Effects
Routes of Entry                 :  (Eye Contact, Dermal, Inhalation.)

Acute effects of over exposure:  
Eyes                                  - Contact with eyes may cause irritation.
Skin                                   - Contact with skin may cause irritation.
Inhalation                           - May cause irritation of the nose and throat.
Ingestion                            - May cause nausea and vomiting.  Large quantities may affect
                                            the central nervous system.

Chronic Effects of Over Exposure: 
No adverse effects anticipated.

Medical Conditions Aggravated By Exposure: 
Existing dermatitis and respiratory condition. Shoes if the cannot be decontaminated.


Physical / Chemical Characteristics

Appearance                          :   Colorless liquid         
Odor                                     :   Odorless
Boiling Point                         :   N/D     
Specific Gravity (water=1)   :   0.8500 - 0.8800
Vapor Pressure                    :   <1 mm Hg 68° F   
Vapor Density (air=1)           :   N/D
Soluble in Water                  :   Insoluble   
Evaporation Rate (ether=1) :   <1

Fire and Explosion Hazard Data

Flash point                           :  Not applicable
Extinguishing Media             :  Not applicable

Special Fire Fighting Procedures
Not applicable

Unusual Fire and Explosion Hazards
Not applicable

Flammable limits                 :  Not applicable
LEL, UEL                              :  Not applicable

Reactivity Data

Stability                                 :  Not applicable
Unstable                               :  Stable
Conditions to avoid              :  Not applicable
Incompatibility                      :  Not applicable
(Materials to avoid)

Hazardous Decomposition or Byproducts
Not applicable

Health Hazard Data

Inhalation                              :  Not applicable
Skin                                      :  Not applicable
Ingestion                               :  Do not ingest

Medical Condition                 :  Not applicable
(Generally aggravated by exposure)


Emergency and First Aid Procedures

Eyes contact                        :  flush with water for 10 minutes while holding eyelids
                                                open. Get medical attention
Skin contact                         :  wash contacted areas with soap and water thoroughly
                                                to remove all residues. If irritation develops consult a
                                                physician. Soaked clothing should be changed
                                                immediately.
Ingestion                               :  Consult physician
Inhalation                              :  get person out of contaminated area to fresh air. If
                                                breathing is difficult, administer oxygen. Consult the
                                                physician.

Handling and storage

Precautions to be taken in handling and storage
-          Avoid excessive heat and contact with skin and eyes
-          When handling, wear chemical splash goggles, face shield, rubber gloves, and protective clothing
-          Wash thoroughly after handling or contact
-          Keep container closed

Personal Protection

Engineering Controls           :   Ventilate to control mists and vapors below exposure limits.
Respiratory Equipment        :   Normally not required, if exposure limits  are exceeded use
                                                 a NIOSH approved organic vapor respirator.  Self-contained
                                                 breathing apparatus is recommended for entry into confined
                                                 spaces or other poorly ventilated areas and for large spill
                                                 clean-up sites.
Eye Protection                     :   Chemical goggles or face shield recommended to minimize
                                                 eye contact.
Protective Clothing               :   Impervious (nitrile) gloves recommended when handling
                                                 material to minimize exposure.  Long sleeve shirts,
                                                 chemically protective aprons and chemically protective
                                                 boots are recommended for contact exposure or spill clean-
                                                 up.  Do not wear watches, rings or similar apparel that could
                                                 entrap the material next to the skin.

Other (Safety Showers, Eye wash stations, etc.):  
Water should be available for flushing and washing when exposure exists.  Launder soiled clothes.  Discard shoes or other leather articles saturated with the material.

Toxicological Information

Please refer to Section 3 for available information on potential health effects.

Ecological Information

No specific ecological data are available for this product. Please refer to Section 6 for information regarding accidental releases and Section 15 for regulatory reporting information.
Waste Disposal Considerations

This product has no characteristic requiring it to be labeled as hazardous waste. Nevertheless, it is important to package, store, transport and dispose of all clean – up materials and any contaminated equipment in accordance with all applicable federal, state, and local health and environmental regulations. Shipments of waste materials may be subject to manifesting requirements per applicable regulation. Appropriate disposal will depend on the nature of each waste material and should be performed by competent and properly permitted contractors. Ensure that all responsible federal, state and local agencies receive proper notification of spill and disposal methods.

Transport Information

Not dangerous goods (ADR/RID)

Regulatory Information

Not applicable

Other Information

Disclaimer, this MSDS has been prepared in accordance with requirements of the OSHA Hazard Communication standard (20CFR). All information, recommendation and suggestion appearing here in concerning our product are based on data believed to be reliable; however, it is the user’s responsibility to determine the safety, toxicity, and suitability for his own of the product described here in.

Caustic Soda

Friday, 28 September 2012

Caustic Soda Micropearl Thailand


A. Product Identification
Synonyms: Sodium Hydroxide (Chemical Family: Alkali Hydroxide)
CAS No.: 1310-73-2
Chemical Formula: NaOH
Purity: 99% Min.
Packing: Two layers of woven bag with waterproof lining bag inside.25kg/bag.Pallets are optional.
Net weight: 25 kg
Origin: Thailand
B. Physical and Chemical Properties
Appearance:                        White Micropearls
Odor:                                   Odorless
Solubility:                           111g/10 ml at 20 C
Specific Gravity:                 2.13 at 20 C (Water= 1)
PH:                                      14 (5% solution)
Bulk Density:                      1.1 – 1.2 Kg/dmɜ
Melting Point:                     318.4 C
Boiling Point:                      1390 C
C. Composition/ Information on Ingredients Sodium Hydroxide (NaOH) : Min 99.0%

Sodium Carbonate (Na2CO3) : Max 0.50%
Sodium Chloride (NaCL) : Max 0.024 %
Sodium Sulfate (Na2SO4) : Max 0.03%
Fe2O3: Max. 10ppm
D. Application: Food Processing Industry

Kegunaan: Kertas, Sabun, Detergen, Textil, Minyak nabati, Elektroplating, Industri makanan dan buah- buahan

BIFLOURIDE (ABF)


Biflouride (ABF)


A. Product Identification
Synonyms: Ammonium Hydrogen Fluoride, Ammonium Difluoride, Acid Ammonium Fluoride
CAS No.: 1341-49-7
Molecular Weight: 57.04
Chemical Formula: NH4HF2 / NH4F HF
Packing: Plastic woven bag lined with high-pressure polythene plastic bag. 25kg/ bag.
Net weight: 25 kg
Origin: China
B. Composition and Information on Ingredients
Appearance: Powder, Crystal
Odor: Odorless
Purity: 98.00 % Min.
Loss on drying: 1.98 % Max.
Residue Content: 0.02 % Max.
Sulphate Content as SO4:  0.10 % Max.
Ammonium Fluorosilicate: 0..30% Max.
C. Physical and Chemical Properties
Solubility: 41..5g/100 g Water @ 25 C (68 F)
Specific Gravity: 1.51
PH: 3.5 (5% solution)
% Volatiles by volume @ 21 C (70 F): 0
Boiling Point: 240 C (464 F)
Melting Point: 124.6 C (257 F)
D. Usages: Glass Manufacturing, Cleaner Products, Porcelain Manufacturing.
Kegunaan: Industri Keramik, Elektroplating, Sterilisasi Untuk Makanan, Minuman & Alat - alat, Etching Glass.

Popular posts

 

DATA SHEET MKR CHEMICALS Copyright © 2011-2012 | Powered by Blogger